The DCR-FE181PRO/DCR-FE180PRO lens captures an amazing wideangle view of 180 degrees on diagonal line
Shooting a creative image or making the ultra wideangle picture? The DCR-FE181PRO/ DCR-180PRO lens captures an amazing wideangle view of 180 degrees on diagonal lines. It stays in focus during the whole zooming when attached to the zoom lens of less than 4-time variation. It's a completely new high definition lens made of the high index optical lens with a 4-group/5-element formula.
There will be no reduction of light value when this conversion lens is attached on the camera's lens.
DCR-FE181PRO comes with 4-adapter rings for 43mm/ 52mm/ 55mm/ 58mm filter sizes.
DCR-FE180PRO comes with 2-adapter rings for 52mm/ and 58mm filter sizes.
There is no difference in the quality of lens between DCR-FE181PRO and DCR-FE180PRO. DCR-FE181PRO available in Feb. 2009
Specifications & Measurements
Magnification
Nominal 0.24x
Actual 180-degree Diagonal, 0.24x Horizontal
4-group/5-element lens design Four adapter rings included
Compatiable with HD Camcorder
DCR-FE181PRO/DCR-FE180PRO are also suitable to 3-CCD chip or mega-pixel Digital Camcorders such as SONY HDR-FX7, HVR-V1, VX-2000, VX-1000, PD-150, PD-100, TRV-900,/950 Canon GL-1, XM-1/2.
Magnification when used with camcorder: Nominal 0.24x, 0.22x/Diagonal, 0.3x/Horizontal(Average magnifications)
A LIST OF ADAPTERS for your Camcorder filter thread sizes
VIDEO CLIP
(MOV 3800KB)
● RA6243 F62-M43mm Adapter ring
for 43mm filter size.
(DCR-FE181PRO-Included accessory)
● RA6252 F62-M52mm Adapter ring
for 52mm filter size.
(DCR-FE181PRO/DCR-FE180PRO-Included accessory)
● RA6255 F62-M55mm Adapter ring
for 55mm filter size.
(DCR-FE181PRO-Included accessory)
● RA6258 F62-M58mm Adapter ring
for 58mm filter size.
(DCR-FE181PRO/DCR-FE180PRO-Included accessory)
● RA6272 F62-M72mm Adapter ring
for 72mm filter size.
(Sold separately.)
●The DCR-FE181PRO/DCR-FE180PRO full-frame (diagonal) fish-eye lens is designed to get a 180 degrees wide angle view suitable with as many as digital camera models available in the market, and it may create a slight ' vignetting ' at the corners of the picture captured with some camera model set at the widest position of the zoom lens.(Pic.1) If you do not like to have the ' vignetting ' effect during picture taking, zoom the camera lens slightly towards telephoto side. ' vignetting ' means that the four corners or a corner of the picture is cut off or darkened slightly.
●Depending upon the model of camera you use, the ' vignetting ' effect will not appear at all even set at the widest range of the zoom lens. The following models are the ones as far as we know at the moment. SONY DSC-F717/F707, OLYMPUS C-755UZ, C-750UZ, C-745UZ, C-740UZ, C-730UZ, C-720UZ, C-700UZ.
However, the image obtained by the cameras which do not create the ' vignetting ' may produce the image less than 180 degrees field of view.
●With Minolta DiMage A200, A2, A1, 7, 7i, Nikon CoolPix5000 models, the 180-degree field of view can be obtained either at diagonal or horizontal lines, set at the widest zoom range.
●The borderline of whether the ' vignetting ' may happen or not lies in the area of 37mm focal length (equivalent o f 35mm film format) of the camera lens. When the camera lens is set at less than 37mm focal length, the ' vignetting ' effect will appear, in obtaining a full-frame 180-degree field of view.
●There would be a possibility of viewing the ' vignetting ' on PC monitor screen, even though it did not appear on the camera's LCD monitor.
●Do not use the built-in flash while the DCR-FE181PRO/DCR-FE180PRO is attached.
●The DCR-FE181PRO/DCR-FE180PRO lens weighs 685g (1.5 lbs) and it's a rather heavy stuff and may limit the way of shooting condition. Be careful in handling the camera with the lens attached, such as supporting or protecting the lens by your own hand. ● Screw-thread pitch size is 0.75mm unless specified.
●The specifications and cosmetic designs may change without prior notice.
(Pic.1)
The above is simulated Vignetting image and Fisheye coverage.
●Exposing the conversion lens to a warm atmosphere in an instant way from the cold area may create some dews on and inside the lens. When it happened inside the lens, keep the lens in a dry area till the dews disappear before using. Repeating such situation may leave dirt spot-(mildew) and affect the image. ●All of Raynox conversion lenses are proudly made in Japan. At our wholly owned manufacturing subsidiary, every stage of production is rigorously checked and tested so that the lens elements compensate effectively for astigmatism, distortion and spherical aberration.... for an excellent image quality. ●The lens is neither made for dust-free nor moisture/water-proof.
RAYNOX® is the registered trademark of Yoshida Industry Co., Ltd. Tokyo. Other brand names and the models are the trademarks of their manufactures or their subsidiaries and may be registered in certain jurisdictions.
HDP-5072EX High Definition Semi-Fisheye conversion Lens 0.5x
HDP-5072EX High Definition Semi-Fisheye conversion Lens 0.5x
The model HDP-5072EX is a 0.5x semi-fish eye conversion lens particularly designed for use with the High Definition large aperture camera lens, and it has a resolution power of 630 lines/mm at center (MTF30%). With the HDP-5072EX lens mounted on a High Definition camera's lens, it broadens 100% more the field of view than the original widest angle of view. In shooting a subject of short distance with HDP-5072EX lens on, it creates an interesting image of semi-fisheye effect, taking an advantage of the -31% distortion nature, but it takes a panoramic picture of 0.5x wide angle coverage without bothering the distortion image, when taken a distant subject.
In using the appropriate adapter rings (sold separately), the *HDP-5072EX lens will be compatible with 52mm, 55mm, 58mm, 62mm, 67mm, 77mm and 82mm filter sizes. The lens goes direct in the camera's filter size of 72mm.
Specifications & Measurements
Construction
Sturdy and solid metal and ABS/PC hybrid body
Magnification
Nominal 0.5x, Actual 0.44x Diagonal, 0.5x Horizontal
It creates a -31% distortion image,
obtaining the semi-fisheye effect.
φ116mm large sized front lens element
3-Group-3-element High Definition Design
* With this conversion lens attached on the Canon XF-305/XF-300, SONY PMW-EX1/EX1R cameras, the vignetting (darkened corners) occurred at the widest angle position will not disappear yet even if it's zoomed.
SONY HDR-FX1000, FX1000E, AX2000, AX2000E, HVR-Z5E, HVR-Z5U, HXR-NX5U, NX5E HD Camcorders
These are the comparison movies taken by a 13x zoom High Definition camera with or without the HDP-5072EX lens attached,
at the same distance.
(16:9 mode)
These are the comparison movies taken by a 12x zoom High Definition camera with or without the HDP-5072EX lens attached,
at the same distance.
(16:9 mode)
These are the comparison movies taken by a 20x zoom High Definition camera with or without the HDP-5072EX lens attached,
at the same distance.
(16:9 mode)
The standard accessories come with the HDP-5072EX lens
● The specifications and cosmetic designs may change without a prior notice.
● HDP-5072EX Semi-fisheye lens weighs 640g and it's rather bulky, and please support the lens by hand carefully in shooting, and dismount the lens after completing the shooting.
● The HDP-5072EX Semi-fisheye lens is designed with a priority purpose of widening the field of view in maintaining the superb high image quality when used at the wide angle range of a camera's zoom lens.
● There will be no influence on the original F number of the camera when HDP-5072EX Semi-fisheye lens is on. It remains the original F number of the camera lens.
● The focusing zoom range with the HDP-5072EX Semi-fisheye lens on will vary depending on the model of High Definition camera in use, and generally speaking the focusing zoom range is from the end of wide angle point up to mid zoom area. No focusing at the telephoto zoom range.
● With the HDP-5072EX lens on, usually do focus the camera under Auto Focus mode. In using the replaced interchangeable lens or in operating under the Special Scene mode, there may be possibility of not focusing precisely even with its manual focus mode.
● Although you may detect a white dot in the HDP-5072EX lens sometimes when looking into from the front, but it's not out of normal and would not affect any of image quality. ● Exposing the conversion lens to a warm atmosphere in an instant way from the cold area may create some dews on and inside the lens. When it happened inside the lens, keep the lens in a dry area till the dews disappear before using. Repeating such situation may leave dirt spot-(mildew) and affect the image. ● All of Raynox conversion lenses are proudly made in Japan. At our wholly owned manufacturing subsidiary, every stage of production is rigorously checked and tested so that the lens elements compensate effectively for astigmatism, distortion and spherical aberration.... for an excellent image quality. ● The lens is neither made for dust-free nor moisture/water-proof.
●When mounting the HDP-5072EX Semi-fisheye lens onto the High Definition camera, we recommend set the camera vertically and do it very carefully, like shown in Pic.1.
MX-3000PRO Semi-Fisheye
Ultra-Wideangle Lens Attachment, 0.3x
MX-3000PRO lens is equipped as same lens as XL-3000PRO with a durable metal body, and attaches 58mm filter size Camcorders directly without using any adapter ring.
The lens provide an extra wideangle view.
Compatible with SONY VX-2100, VX-2000, DSR-PD170, DSR-PD150, DSR-250,Canon GL-1, XM-1/2,XV-1
Magnification: Nominal 0.3x,
Actual 0.25x/Diagonal, 0.35x/Horizontal
Lens construction: 1G/1E, all surfaces fully coated
(Limited zoom capability)
Front filter size: 87mm
Mounting threads: 58mm
Size/Weight: 20 x 95mm/195g(6.9oz)
Accessories included: Lens caps, Lens pouch.
For 27-37mm filter size click
MX-3000PRO vs DCR-FE180PRO image comparison shots. Click
XL-3000PRO Semi-Fisheye
Ultra-Wideangle Lens Attachment, 0.3x
XL-3000PRO lens is equipped with a Lens Hood and universal sized Snap-on mount, and attaches instantly to your Camcorders lens to provide an extra wideangle view.
Universal mount is suitable for 52-67mm filter sizes.
Compatible with SONY VX-2100, VX-2000, DSR-PD170, DSR-PD150, DSR-250,Canon GL-1, XM-1/2,XV-1
Magnification: Nominal 0.3x,
Actual 0.25x/Diagonal, 0.35x/Horizontal
Lens construction: 1G/1E, all surfaces fully coated
(Limited zoom capability)
Size/Weight: 24 x 135mm/175g(6.2oz)
Accessories included: Lens caps, Lens pouch.
For 27-37mm filter size click
For 0.7x and 0.5x Wideangle conversion lens click
Explores the world of MACROPHOTOGRAPHY with your SLR 35mm camera or Medium format camera.
35mm SLR camera
The MacroExplorer lenses are made to be used with any 35mm SLR camera interchangeable lenses in the range of 50mm to 300mm focal length.
Medium Format Compatibility
The MacroExplorer lenses work just as well on medium format SLR camera. 72mm and 77mm adapter rings are optionally available for this purpose.
Large Aperture Lenses
The both 1,5x & 2,5x Macro lenses are designed with large apertures for max. light transmission. Wide-open apertures mean fast enough speeds, even on overcast days.
Why Two Macro Lenses ?
Two lenses are supplied to make available a full range of magnification. The lenses yield reproduction ratio from 1:4 (0.25x) to 2.7:1(2.7x) including the popular macro ratio of 1:1(life size on the film).
The DCR-2025PRO/DCR-2020PRO lens is originally designed to produce optimum image quality when used with a camera/camcorder incorporated with 8-time or higher zoom lens.However, depending upon the matching with the type of camera lens it may produces a superb image quality with a zoom lens less than 8-time ratio such as 4 times or 6 times.
Compatible with HD-Camcorder
DCR-2025PRO/DCR-2020PRO are also suitable to the High Definition Digital Camcorders and DVCAM such as SONY HDR-FX7, VX-2100, VX-2000, VX-1000, PD-170, PD-150, PD-100, TRV-900,/950 Canon GL-1, GL-2, XM-1/2. etc.
A LIST OF ADAPTERS for your Camcorder filter thread sizes
● RA6243 F62-M43mm Adapter ring
for 43mm filter size.
(DCR-2025PRO-Included accessory)
● RA6252 F62-M52mm Adapter ring
for 52mm filter size.
(DCR-2025PRO/DCR-2020PRO-Included accessory)
● RA6255 F62-M55mm Adapter ring
for 55mm filter size.
(DCR-2025PRO-Included accessory)
● RA6258 F62-M58mm Adapter ring
for 58mm filter size.
(DCR-2025PRO/DCR-2020PRO-Included accessory)
NEW RA6272 F62-M72mm Adapter ring is also available.(Sold separately)
●** DCR-2025PRO/DCR-2020PRO may cause vignetting image( darkening one or more corner of the taken image )when used with this model.
●DCR-2025PRO/DCR-2020PRO was designed to use at most Telephoto position of camera's zoom lens.
●Zooming towards wide angle side while the lens is attached may result in some degree of darkening at the corners of the frame(vignetting). Use at the maximum telephoto position of the zoom lens.
●The remote control function may not work properly when the DCR-2025PRO/DCR-2020PRO is attached. Use the LCD monitor screen for getting a precise picture framing, not through the optical view finder.
●Be careful in handling the camera with the lens attached, such as supporting or protecting the lens by your own hand.
●The specifications and cosmetic designs may change without prior notice. ● Screw-thread pitch size is 0.75mm unless specified.
●Do not use the built-in flash while the DCR-2025PRO/DCR-2020PRO is attached. ●Exposing the conversion lens to a warm atmosphere in an instant way from the cold area may create some dews on and inside the lens. When it happened inside the lens, keep the lens in a dry area till the dews disappear before using. Repeating such situation may leave dirt spot-(mildew) and affect the image. ●All of Raynox conversion lenses are proudly made in Japan. At our wholly owned manufacturing subsidiary, every stage of production is rigorously checked and tested so that the lens elements compensate effectively for astigmatism, distortion and spherical aberration.... for an excellent image quality. ●The lens is neither made for dust-free nor moisture/water-proof.
RAYNOX® is the registered trademark of Yoshida Industry Co., Ltd. Tokyo. Other brand names and the models are the trademarks of their manufactures or their subsidiaries and may be registered in certain jurisdictions.
HDP-9000EX High Definition Telephoto conversion Lens 1.8x
Especially developed for using with a large aperture taking lens of High Definition camera, extending the focal length 1.8 times. Brings a distant subject up very close in maintaining the original superb image quality.
HDP-9000EX lens is originally designed in high resolution formula getting an amazing It perfectly suits to a high definition camera.
The lens comes with an originally made Lens Shade which shuts a flare and ghost image effect considerably and the lens case. These are packed with the lens in the carton together.
With the HDP-9000EX lens attached, there will be no influence on F number of the master lens.
The lens has a mounting thread of 72mm, and with an adapter ring of 62mm, 77mm or 82mm, which are sold separately, the lens can be attached on the suitable camera lens.
Specifications & Measurements
Construction
Sturdy and solid metal body(except the Lens Shade)
Magnification
Nominal 1.8x Actual 1.8x Diagonal, 1.8x Horizontal
SONY HDR-FX1000, FX1000E, AX2000, AX2000E, HVR-Z5E, HVR-Z5U, HXR-NX5U, NX5E HD Camcorders
These are the comparison movies taken by a 20x zoom High Definition camera with or without the HDP-9000EX lens attached,
at the same distance.
(16:9 mode)
These are the comparison movies taken by a 12x zoom High Definition camera with or without the HDP-9000EX lens attached,
at the same distance.
(16:9 mode)
These are the comparison movies taken by a 20x zoom High Definition camera with or without the HDP-9000EX lens attached,
at the same distance.
(16:9 mode)
With HDP-9000EX lens on, there will be a darkening at corners (vignetting) when the camera is zoomed towards wide angle side, though the starting point of darkening may vary depending on the camera in use. For example, with Sony HDR-FX1/HVR-Z1 it does not occur between 6x and 12x zoom area, With SONY HDR-FX7/HVR-V1 it does not occur between 5x and 20x zoom area, With SONY HVR-Z7/Z7E 12x zoom lens it does not occur between 8x and 12x zoom area, With Canon XL 1/XL 2, XL H1 20x zoom it will be between 6x and 20x zoom area, And with XH G1/XH A1 it will be between 13x and 20x zoom area. The 'vignetting' means the darkened corners on the picture, and it may happen with only at one corner or two or all four, depending upon the characteristics of the camera in use.
The standard accessories come with the HDP-9000EX lens
Lens hood / Sun shade
Lens case
Lens caps
● RA7282 F72-M82mm Adapter ring
for 82mm filter size.(Sold separately)
● RA7277 F72-M77mm Adapter ring
for 77mm filter size.(Sold separately)
● RA7267 F72-M67mm Adapter ring
for 67mm filter size.(Sold separately)
● RA7262 F72-M62mm Adapter ring
for 62mm filter size.(Sold separately)
● RA7258 F72-M58mm Adapter ring
for 58mm filter size.(Sold separately)
● RA7255 F72-M55mm Adapter ring
for 55mm filter size.(Sold separately)
● RA7252 F72-M52mm Adapter ring
for 52mm filter size.(Sold separately)
● The specifications and cosmetic designs may change without a prior notice.
● HDP-9000EX lens weighs 825g and it's rather bulky, and please support the lens by hand carefully in shooting, and dismount the lens after completing the shooting.
With HDP-9000EX lens on, there will be a darkening at corners (vignetting) when the camera is zoomed towards wide angle side, though the starting point of darkening may vary depending on the camera in use. For example, with Sony HDR-FX1/HVR-Z1 it does not occur between 6x and 12x zoom area, With SONY HDR-FX7/HVR-V1 it does not occur between 5x and 20x zoom area, With SONY HVR-Z7/Z7E 12x zoom lens it does not occur between 8x and 12x zoom area, With Canon XL 1/XL 2, XL H1 20x zoom it will be between 6x and 20x zoom area, And with XH G1/XH A1 it will be between 13x and 20x zoom area. The 'vignetting' means the darkened corners on the picture, and it may happen with only at one corner or two or all four, depending upon the characteristics of the camera in use.
● Please note that the minimum shooting distance of the camera may extend three times when HDP-9000EX lens is attached on.
● There will be no influence on the original F number of the camera when HDP9000EX lens is on. It remains the original F number of the camera lens. ● Screw-thread pitch size is 0.75mm unless specified. ●Exposing the conversion lens to a warm atmosphere in an instant way from the cold area may create some dews on and inside the lens. When it happened inside the lens, keep the lens in a dry area till the dews disappear before using. Repeating such situation may leave dirt spot-(mildew) and affect the image. ●All of Raynox conversion lenses are proudly made in Japan. At our wholly owned manufacturing subsidiary, every stage of production is rigorously checked and tested so that the lens elements compensate effectively for astigmatism, distortion and spherical aberration.... for an excellent image quality. ●The lens is neither made for dust-free nor moisture/water-proof.
DCR-1542PRO HIGH DEFINITION TELEPHOTO CONVERSION LENS
High-Resolution 340-line/mm
2G/4E High Definition design
Minimum Chromatic Aberration
67mm Front filter size
Bringing a distant object really very close The model DCR-1545PRO/DCR-1542PRO high definition telephoto lens is made of the high index optical glass elements with new concept of lens designing using two-group/four-element lens formulae. This new concept in designing the lens made it possible to achieve an amazing high definition telephoto lens of the 340 lines/mm resolution power at center (MTF30%), low dispersion and the increased light transmittance at fringe area. This is an ideal Telephoto conversion lens for the High Definition camera with 25x or more optical zoom lens. By using a suitable adapter and/or holder, the DCR-1542PRO lens can be used with the appropriate digital still camera or HD video camcorder, effectively. DCR-1542PRO comes with 3-adapter rings for 37mm, 43mm and 55mm filter sizes. There is no difference in the quality of lens between DCR-1545PRO, DCR-1542PRO, DCR-1541PRO and DCR-1540PRO. High-Resolution 340-line/mm 2G/4E High Definition design Minimum Chromatic Aberration 67mm Front filter size An actual image taken with DCR-1540PRO Click the lens to comparison images Specifications & Measurements Magnification Nominal 1.54x Actual 1.54x/Diagonal, 1.54x/Horizontal Lens construction 2-group/4-element, Coated optical glass elements Front Filter size 67mm Mounting thread 52mm Dimensions 67mm x 71mm Weight 240g(8.5oz) Accessories for DCR-1542PRO 3-Adapter rings for 37mm, 43mm and 46mm filter sizes, Lens pouch, Lens caps, Instruction manuals Accessories for DCR-1545PRO 2-Adapter rings for 49mm and 55mm filter sizes, Lens pouch, Lens caps, Instruction manuals DCR-1542PRO included adapter rings Compatible with 4K/HD-Camcorder DCR-1545PRO/DCR-1542PRO is also suitable to the 4K/HDV Camcorders, 3-CCD chip or mega-pixel Digital Camcorders and DVCAM.
There is no difference in the quality of lens between DCR-1545PRO, DCR-1542PRO, DCR-1541PRO and DCR-1540PRO.
Specifications & Measurements
Magnification
Nominal 1.54x
Actual 1.54x/Diagonal, 1.54x/Horizontal
DCR-1545PRO HIGH DEFINITION TELEPHOTO CONVERSION LENS
High-Resolution 340-line/mm
2G/4E High Definition design
Minimum Chromatic Aberration
67mm Front filter size
The model DCR-1545PRO/DCR-1542PRO high definition telephoto lens is made of the high index optical glass elements with new concept of lens designing using two-group/four-element lens formulae. This new concept in designing the lens made it possible to achieve an amazing high definition telephoto lens of the 340 lines/mm resolution power at center (MTF30%), low dispersion and the increased light transmittance at fringe area. This is an ideal Telephoto conversion lens for the High Definition camera with 25x or more optical zoom lens. By using a suitable adapter and/or holder, the DCR-1545PRO/DCR-1542PRO lens can be used with the appropriate digital still camera or HD video camcorder, effectively. DCR-1545PRO comes with 2-adapter rings for 49mm and 55mm filter sizes.
Specifications & Measurements
Magnification
Nominal 1.54x
Actual 1.54x/Diagonal, 1.54x/Horizontal
The image distortion occurs more or less with a wideangle lens on, but this particular lens is especially made for Distortion Free（-1.3％） based on the sophisticated lens formula which produces a resolution power of 350-line/mm at center（MTF30%）. Especially designed for use with high-definition digital camera, and the lens is made of hi-index optical glasses, 3-group/3-element, fully coated. It's an ideal accessory lens for professionals and advanced amateurs shooting in tight place. There will be no reduction of light value when this conversion lens is attached on the camera's lens.
The original Raynox adapters are designed and made to suit the best physically and optically to the HD-6600PRO lens to obtain the optimum image quality like the pictures shown in our website. When the adapters of other makers are used with Raynox HD-6600PRO lens, the picture image quality could be slightly deteriorated, especially around the corners.
Center resolution power 350-line/mm
Non-Distortion Image of -1.3%
72mm front filter threads
3-Groupe-3-element High Definition Design
Specifications & Measurements
Magnification
Nominal 0.66x, Actual 0.66x Diagonal, 0.66x Horizontal
Lens construction
3-group/3-element, Coated optical glass elements
Image distortion
-1.3%(max.wideangle)
Front Filter thread
72mm
Mounting thread
37mm, 43mm, 46mm, 49mm, 52mm, 55mm, 58mm
Dimensions (Height x Diameter)
43mm x 76mm/HD-6600PRO-37, 38mm x 76mm/HD-6600PRO-43, 40mm x 76mm/HD-6600PRO-46,
38mm x 76mm/HD-6600PRO-49, 40mm x 76mm/HD-6600PRO-52, 40mm x 76mm/HD-6600PRO-55,
36mm x 76mm/HD-6600PRO-58
●The cosmetic designs may change without prior notice. ●The focusing zoom range with the HD-6600PRO lens on will vary depending on the model of High Definition camera in use, and generally speaking the focusing zoom range is from the end of wide angle point up to 6x zoom area. No focusing at the telephoto end. ●Remote control function and internal video light/Flash may not work properly with conversion lens attached. ●Special Notes: The rear lens element of HD-6600PRO-58(58mm size) model is made protruded from the mounting threads of the barrel, and it may hit or give damage on the front lens of camcorder when mounted with the models other than described underneath;Compatible camcorder models SONY VX-2000/PD-150/DSR-250 Digital Camcorders, Canon GL-1/2,XM-1/2 Digital Camcorders. ●There is no difference in the optical performance of lens quality between DCR-6600PRO and other HD-6600PRO models. ●Exposing the conversion lens to a warm atmosphere in an instant way from the cold area may create some dews on and inside the lens. When it happened inside the lens, keep the lens in a dry area till the dews disappear before using. Repeating such situation may leave dirt spot-(mildew) and affect the image. ●All of Raynox conversion lenses are proudly made in Japan. At our wholly owned manufacturing subsidiary, every stage of production is rigorously checked and tested so that the lens elements compensate effectively for astigmatism, distortion and spherical aberration.... for an excellent image quality. ●The lens is neither made for dust-free nor moisture/water-proof.
The model HD-7062PRO, HD-7000PRO high definition Wideangle conversion lens are made of the high index optical glass elements with new concept of lens designing using three-group/three-element lens formula. This new concept in designing the lens made it possible to achieve an amazing high definition wideangle lens of 540 lines/mm resolution power at center (MTF30%).
It's compatible with whole zoom area and stays in focus*.
There will be no reduction of light value when this conversion lens is attached on the camera's lens.
There are no quality difference between HD-7062PRO and HD-7000PRO except its mounting thread size.
HD-7062PRO is 62mm mounting threads. HD-7000PRO is 58mm mounting threads.
Compatible with whole zoom area
82mm front filter size
High-Resolution 540-line/mm
3-Group/3-Element High Definition design
Specifications & Measurements
Magnification
Nominal 0.70x, Actual 0.70x Diagonal, 0.71x Horizontal
Lens construction
3-group/3-element, Coated optical glass elements
Image distortion
-2.3%(max.wideangle)
Front Filter thread
82mm
Mounting thread
62mm/HD-7062PRO, 58mm/HD-7000PRO
Dimensions
43mm x 86mm/HD-7062PRO, 40mm x 86mm/HD-7000PRO
Weight
313g(11.1oz)
Accessories
Pouch, Lens caps, Instruction manuals
Adapter rings for use with HD-7000PRO(Sold separately)
RA5837 for 37mm Filter size
RA5843 for 43mm Filter size.
RA5852 for 52mm Filter size.
Wideangle to Telephoto Video Clip taken with HD-7000PRO on Digital Video Camcorder
(600KB)
(256KB)
●The cosmetic designs may change without prior notice. ●Depending upon the model of camera in use or the condition of shooting, especially when the lighting is not bright enough, there may be possibility of creating a flare effect which reduces the image quality at the telephoto. When the HD-7062PRO, HD-7000PRO lens are attached and set at telephoto for a distant object, please make sure that the object is under the bright condition. ●The HD-6600PRO wideangle lens is designed with a priority purpose of widening the field of view in maintaining the superb high image quality when used at the wide angle range of a camera's zoom lens. ●The lens is made compatible in using with a 20x zoom lens. However, when zoomed up to the end of the telephoto with the lens on, the image quality of the picture will be lowered except the center area, and the deterioration of resolution power at corners will occur. ●Remote control function and internal video light/Flash may not work properly with conversion lens attached. ●For use with Panasonic AG-DVC30 camera; use Raynox PFR-043MC filter between the RA5843 and the camera lens threads. ●Exposing the conversion lens to a warm atmosphere in an instant way from the cold area may create some dews on and inside the lens. When it happened inside the lens, keep the lens in a dry area till the dews disappear before using. Repeating such situation may leave dirt spot-(mildew) and affect the image. ●All of Raynox conversion lenses are proudly made in Japan. At our wholly owned manufacturing subsidiary, every stage of production is rigorously checked and tested so that the lens elements compensate effectively for astigmatism, distortion and spherical aberration.... for an excellent image quality. ●The lens is neither made for dust-free nor moisture/water-proof.
XL-7000PRO Wideangle Lens Attachment, 0.7x
XL-7000PRO lens is equipped with a Lens Hood and universal sized Snap-on mount, and attaches instantly to your Camcorders lens to provide an extra wideangle view.
Universal mount is suitable for 52-67mm filter sizes.
Compatible with SONY VX-2100, 2000, DSR-PD170, DSR-PD150/PD100, DSR-250, TRV-900, TRV-950(RA5237B required), Canon GL-1, GL-2, XM-1,XM-2.
Nominal 0.7x(Actual 0.7x/horizontal, 0.68x/diagonal).
(Limited zoom capability)
Size/Weight: 24 x 135mm/93g
For 27-37mm filter size click
*Limited in use at maximum wideangle setting.
*It does not focus in infinity focus setting.
*Set the camera in AUTO mode while the lens is attached.
● The cosmetic designs may change without prior notice. ● Remote control function and internal video light/Flash may not work properly with conversion lens attached. ● Exposing the conversion lens to a warm atmosphere in an instant way from the cold area may create some dews on and inside the lens. When it happened inside the lens, keep the lens in a dry area till the dews disappear before using. Repeating such situation may leave dirt spot-(mildew) and affect the image. ● All of Raynox conversion lenses are proudly made in Japan. At our wholly owned manufacturing subsidiary, every stage of production is rigorously checked and tested so that the lens elements compensate effectively for astigmatism, distortion and spherical aberration.... for an excellent image quality. ● The lens is neither made for dust-free nor moisture/water-proof.
The lens is designed for use with almost all popular digital still cameras and HD video camcorders in the market by using either a Lens Holder Tube or an Adapter Ring or the both of them, which are available separately from us. DCR-732/DCR-731 lens broadens angle of view 37% more than original camera lens. The lens is made of high index optical glass elements which obtain the maximum resolution power of 375 lines/mm at center (MTF30%), There will be no reduction of light value when this conversion lens is attached on the camera's lens. DCR-732 comes with 3-adapter rings for 37mm, 43mm and 46mm filter sizes.
.gif){kind=small}
.gif){kind=small}
.gif)
.jpg)
.gif)
.gif){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg)
.gif){kind=small}
.gif)
.gif){kind=small}
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.gif){kind=small}
.gif){kind=small}
.gif){kind=small}
.gif){kind=small}
.gif){kind=small}
.gif){kind=small}
.gif){kind=small}
.gif){kind=small}
