The DCR-FE181PRO/DCR-FE180PRO lens captures an amazing wideangle view of 180 degrees on diagonal line
Shooting a creative image or making the ultra wideangle picture? The DCR-FE181PRO/ DCR-180PRO lens captures an amazing wideangle view of 180 degrees on diagonal lines. It stays in focus during the whole zooming when attached to the zoom lens of less than 4-time variation. It's a completely new high definition lens made of the high index optical lens with a 4-group/5-element formula.
There will be no reduction of light value when this conversion lens is attached on the camera's lens.
DCR-FE181PRO comes with 4-adapter rings for 43mm/ 52mm/ 55mm/ 58mm filter sizes.
DCR-FE180PRO comes with 2-adapter rings for 52mm/ and 58mm filter sizes.
There is no difference in the quality of lens between DCR-FE181PRO and DCR-FE180PRO. DCR-FE181PRO available in Feb. 2009
Specifications & Measurements
Magnification
Nominal 0.24x
Actual 180-degree Diagonal, 0.24x Horizontal
4-group/5-element lens design Four adapter rings included
Compatiable with HD Camcorder
DCR-FE181PRO/DCR-FE180PRO are also suitable to 3-CCD chip or mega-pixel Digital Camcorders such as SONY HDR-FX7, HVR-V1, VX-2000, VX-1000, PD-150, PD-100, TRV-900,/950 Canon GL-1, XM-1/2.
Magnification when used with camcorder: Nominal 0.24x, 0.22x/Diagonal, 0.3x/Horizontal(Average magnifications)
A LIST OF ADAPTERS for your Camcorder filter thread sizes
VIDEO CLIP
(MOV 3800KB)
● RA6243 F62-M43mm Adapter ring
for 43mm filter size.
(DCR-FE181PRO-Included accessory)
● RA6252 F62-M52mm Adapter ring
for 52mm filter size.
(DCR-FE181PRO/DCR-FE180PRO-Included accessory)
● RA6255 F62-M55mm Adapter ring
for 55mm filter size.
(DCR-FE181PRO-Included accessory)
● RA6258 F62-M58mm Adapter ring
for 58mm filter size.
(DCR-FE181PRO/DCR-FE180PRO-Included accessory)
● RA6272 F62-M72mm Adapter ring
for 72mm filter size.
(Sold separately.)
●The DCR-FE181PRO/DCR-FE180PRO full-frame (diagonal) fish-eye lens is designed to get a 180 degrees wide angle view suitable with as many as digital camera models available in the market, and it may create a slight ' vignetting ' at the corners of the picture captured with some camera model set at the widest position of the zoom lens.(Pic.1) If you do not like to have the ' vignetting ' effect during picture taking, zoom the camera lens slightly towards telephoto side. ' vignetting ' means that the four corners or a corner of the picture is cut off or darkened slightly.
●Depending upon the model of camera you use, the ' vignetting ' effect will not appear at all even set at the widest range of the zoom lens. The following models are the ones as far as we know at the moment. SONY DSC-F717/F707, OLYMPUS C-755UZ, C-750UZ, C-745UZ, C-740UZ, C-730UZ, C-720UZ, C-700UZ.
However, the image obtained by the cameras which do not create the ' vignetting ' may produce the image less than 180 degrees field of view.
●With Minolta DiMage A200, A2, A1, 7, 7i, Nikon CoolPix5000 models, the 180-degree field of view can be obtained either at diagonal or horizontal lines, set at the widest zoom range.
●The borderline of whether the ' vignetting ' may happen or not lies in the area of 37mm focal length (equivalent o f 35mm film format) of the camera lens. When the camera lens is set at less than 37mm focal length, the ' vignetting ' effect will appear, in obtaining a full-frame 180-degree field of view.
●There would be a possibility of viewing the ' vignetting ' on PC monitor screen, even though it did not appear on the camera's LCD monitor.
●Do not use the built-in flash while the DCR-FE181PRO/DCR-FE180PRO is attached.
●The DCR-FE181PRO/DCR-FE180PRO lens weighs 685g (1.5 lbs) and it's a rather heavy stuff and may limit the way of shooting condition. Be careful in handling the camera with the lens attached, such as supporting or protecting the lens by your own hand. ● Screw-thread pitch size is 0.75mm unless specified.
●The specifications and cosmetic designs may change without prior notice.
(Pic.1)
The above is simulated Vignetting image and Fisheye coverage.
●Exposing the conversion lens to a warm atmosphere in an instant way from the cold area may create some dews on and inside the lens. When it happened inside the lens, keep the lens in a dry area till the dews disappear before using. Repeating such situation may leave dirt spot-(mildew) and affect the image. ●All of Raynox conversion lenses are proudly made in Japan. At our wholly owned manufacturing subsidiary, every stage of production is rigorously checked and tested so that the lens elements compensate effectively for astigmatism, distortion and spherical aberration.... for an excellent image quality. ●The lens is neither made for dust-free nor moisture/water-proof.
RAYNOX® is the registered trademark of Yoshida Industry Co., Ltd. Tokyo. Other brand names and the models are the trademarks of their manufactures or their subsidiaries and may be registered in certain jurisdictions.
DCR-CF187PRO High Definition 185º Circular Fish-Eye Conversion Lens
Diagonal to Circular Fisheye image
A fabulous 185-degree Circular Fisheye conversion lens was introduced from Raynox, called DCR-CF187PRO, DCR-CF185PRO Once again, Raynox filled the need of advanced image creators. Upon mounting on the zoom lens, it opens the field of view to the ultra wide angle, the diagonal fisheye angle and to the circular fisheye images. A very interesting feature of this particular lens makes it possible to change the scenery from an ultra wide angle view to a diagonal fisheye and to the circular fisheye or the other way, by zooming the lens.
DCR-CF187PRO comes with 4-adapter rings for 43mm/ 52mm/ 55mm/ 58mm filter sizes
DCR-CF185PRO comes with 2-adapter rings for 52mm/ and 58mm filter sizes
There is no difference in the quality of lens between DCR-CF187PRO and DCR-CF185PRO.
185-degree Field of View on all directions
4-Group-6-element High Definition Design
Shifts Diagonal to Circular Fisheye Image*
Four adapter rings included**
Specifications & Measurements
Magnification
Nominal 185-degree
Actual 185-degree Diagonal, 185-degree Horizontal
To achieve a Circular Fish-Eye image, the focal length of the camera's lens must be about 36mm or shorter (equivalent of 35mm film format). Otherwise, it may not make a complete Circular Fish-Eye image. *There are some cameras you can shoot a Circular Fish-Eye picture but not a Diagonal Fish-Eye image. Video camcorder may not achieve circular fisheye image. **DCR-CF187PRO
Upon mounting on the zoom lens, The DCR-CF187PRO/DCR-CF185PRO opens the field of view to the ultra wide angle, the diagonal fisheye angle and to the circular fisheye images. It's a completely new high definition lens made of the high index optical coated lens with a 4-group/6-element formula to obtain the maximum resolution power of 500 lines/mm at center (MTF30%), while it has low dispersion.
Camera's Maximum Wideangle image with DCR-CF187PRO.
●The Fish-Eye lens is a precision optical instrument, assembled with critical alignment tolerance. Do not subject it to severe shock and to the conditions of excessive cold, heat or humidity. Do not disassemble the lens. ●See the focusing on the LCD monitor. Thru the optical finder, you cannot capture the whole broadened angle of view. ●To achieve a Circular Fish-Eye image, the focal length of the camera's lens must be about 36mm or shorter (equivalent of 35mm film format). Otherwise, it may not make a complete Circular Fish-Eye image. There are cameras you can shoot a Circular Fish-Eye picture but not a Diagonal Fish-Eye image while the DCR-CF187PRO is attached. ●The built-in remote control system of the camera may not function properly, when the Fish-Eye lens is attached. It is recommended to make a trial shooting before you use the remote control system. ●Please remove the DCR-CF187PRO lens and holder from the camera after completing your shooting. ●There would be a possibility of viewing the ' vignetting ' on PC monitor screen, even though it did not appear on the camera's LCD monitor. ●Do not use the built-in flash while the DCR-CF187PRO is attached. ●The DCR-CF187PRO lens weighs 565g (1.24 lbs) and it's a rather heavy stuff and may limit the way of shooting condition. Be careful in handling the camera with the lens attached, such as supporting or protecting the lens by your own hand. ● Screw-thread pitch size is 0.75mm unless specified.
●The specifications and cosmetic designs may change without prior notice.
The above is simulated Circular Fisheye image and Diagonal Fisheye coverage.
●Exposing the conversion lens to a warm atmosphere in an instant way from the cold area may create some dews on and inside the lens. When it happened inside the lens, keep the lens in a dry area till the dews disappear before using. Repeating such situation may leave dirt spot-(mildew) and affect the image. ●All of Raynox conversion lenses are proudly made in Japan. At our wholly owned manufacturing subsidiary, every stage of production is rigorously checked and tested so that the lens elements compensate effectively for astigmatism, distortion and spherical aberration.... for an excellent image quality. ●The lens is neither made for dust-free nor moisture/water-proof.
HDP-2800ES High Definition Diagonal Fisheye conversion Lens 0.28x
HDP-2800ES High Definition
Diagonal Fisheye conversion Lens 0.28x
The HDP-2800ES lens is a conversion lens for capturing an ultra wide angle image in using with the High Definition Digital camcorder. The lens is particularly designed to be in focus through the whole zoom range of up to 5x*. The lens is made of the high index optical glass elements in 3-group/3-element formula, and it's made in compact size and light weight. It achieved an amazing high resolution power of 475 lines/mm at center (MTF30%). Mounting on the wide angle lens of f=26mm or less (35mm film equivalent) focal length, it will be possible to shoot the scene of 180-degree diagonal**.
The two adapter rings of 37mm and 43mm come with the lens in the original factory package for use with the same filter sized lenses. Available in February 2011. A true High-Definition quality edge to edge
It creates a -64% distortion image,
obtaining the Fisheye effect.
3-Group-3-element High Definition Design
205g Compact size design
Specifications & Measurements
Construction
Sturdy and solid metal and ABS/PC hybrid body
Magnification
Nominal 0.28x, Actual 0.18x Diagonal, 0.32x Horizontal
SONY HDR-CX550V/550VE, HDR-XR550V/550VE, HXR-MC50/50E
AVCHD Camcorders
SONY HDR-CX110/150/115E/116E/155E,
HDR-XR150/XR155E AVCHD Camcorders
SONY HDR-CX12/SR12/SR11
AVCHD Camcorders
These are the comparison movies taken by a 10x zoom High Definition camera with or without the HDP-2800ES lens attached,
at the same distance.
(16:9 mode)
These are the comparison movies taken by a 25x zoom High Definition camera with or without the HDP-2800ES lens attached,
at the same distance.
(16:9 mode)
These are the comparison movies taken by a 12x zoom High Definition camera with or without the HDP-2800ES lens attached,
at the same distance.
(16:9 mode)
Compatible with Digital Still Camera
HDP-2800ES Diagonal Fisheye conversion lens is also suitable to the Digital Still cameras.
A LIST OF ADAPTERS for your camera lens filter thread sizes
These images were taken with Digital Still Camera(4:3 mode)
● The specifications and cosmetic designs may change without a prior notice. ● For 37mm filter sized camera : A 52-37mm adapter ring is already mounted on the HDP-2800ES originally and you can mount the HDP-2800ES directly by screwing onto 37mm filter sized camera lens. For other than 37mm filter sized camera lens : Remove the 52-37mm adapter ring from the HDP-2800ES by unscrewing and then replace it with the appropriate thread sized adapter ring. Then you can mount the HDP-2800ES onto the front filter threads of the camera lens by screwing.
● The HDP-2800ES lens is a precision optical instrument, assembled with critical alignment tolerances. Do not subject it to severe shock and to the conditions of excessive cold, heat or humidity.
● Do not use the built-in flash when the HDP-2800ES lens is attached on. If you do, the shadow of the lens may show on the picture.
● To avoid any damages on the front lens of the camera in use with the HDP-2800ES lens, please make sure the adapter ring is to be mounted on first. It can not be mounted direct on the 52mm filter sized camera lens. Please mount our original adapter ring RA5252B or RA5252 sold separately if need to use HDP-2800ES lens onto 52mm filter sized camera lens.
● There may be some chances of malfunction of the remote control system when operated while the HDP-2800ES lens is on. So, it's recommended to make a rehearsal shooting, before using the remote control system.
● Please treat and protect carefully in shooting the camera with the HDP-2800ES lens on. Please remove the HDP-2800ES lens from the camera whenever a shooting is over, and do not carry around the camera with the lens on. It may cause damages or spoil the lens and the camera as well.
● With the HDP-2800ES lens on, usually do focus the camera under Auto Focus mode. In using the replaced interchangeable lens or in operating under the Special Scene mode, there may be possibility of not focusing precisely.
● For resolving the matter of vignetting (darkened or cutting off the image corners) on the still image obtained with the HDP-2800ES lens on, while maintaining the max. diagonal fish-eye effect, it's recommended to use an image treatment software and make an appropriate trimming.
See the example photos.
● Although you may detect a white dot in the HDP-2800ES lens sometimes when looking into from the front, but it's not out of normal and would not affect any of image quality.
● The focusing zoom range with the HDP-2800ES lens on will vary depending on the model of High Definition camera in use, and generally speaking the focusing zoom range is from the end of wide angle point up to mid zoom area. No focusing at the telephoto zoom range.
● When mounting the HDP-2800ES lens onto the High Definition camera, we recommend set the camera vertically and do it very carefully. ● Exposing the conversion lens to a warm atmosphere in an instant way from the cold area may create some dews on and inside the lens. When it happened inside the lens, keep the lens in a dry area till the dews disappear before using. Repeating such situation may leave dirt spot-(mildew) and affect the image. ● All of Raynox conversion lenses are proudly made in Japan. At our wholly owned manufacturing subsidiary, every stage of production is rigorously checked and tested so that the lens elements compensate effectively for astigmatism, distortion and spherical aberration.... for an excellent image quality. ● The lens is neither made for dust-free nor moisture/water-proof.
* The 5x zoom compatibility mentioned above is based on the actual test data made with the under 10x zoom HD camcorder, and depending upon the model of camera lens you use, effective zooming may become less than 5x. For finding the suitable camera models please visit our Raynox Home Page and see the Cross Reference Table.
** A designing calculation figure.
HDP-5072EX High Definition Semi-Fisheye conversion Lens 0.5x
HDP-5072EX High Definition Semi-Fisheye conversion Lens 0.5x
The model HDP-5072EX is a 0.5x semi-fish eye conversion lens particularly designed for use with the High Definition large aperture camera lens, and it has a resolution power of 630 lines/mm at center (MTF30%). With the HDP-5072EX lens mounted on a High Definition camera's lens, it broadens 100% more the field of view than the original widest angle of view. In shooting a subject of short distance with HDP-5072EX lens on, it creates an interesting image of semi-fisheye effect, taking an advantage of the -31% distortion nature, but it takes a panoramic picture of 0.5x wide angle coverage without bothering the distortion image, when taken a distant subject.
In using the appropriate adapter rings (sold separately), the *HDP-5072EX lens will be compatible with 52mm, 55mm, 58mm, 62mm, 67mm, 77mm and 82mm filter sizes. The lens goes direct in the camera's filter size of 72mm.
Specifications & Measurements
Construction
Sturdy and solid metal and ABS/PC hybrid body
Magnification
Nominal 0.5x, Actual 0.44x Diagonal, 0.5x Horizontal
It creates a -31% distortion image,
obtaining the semi-fisheye effect.
φ116mm large sized front lens element
3-Group-3-element High Definition Design
* With this conversion lens attached on the Canon XF-305/XF-300, SONY PMW-EX1/EX1R cameras, the vignetting (darkened corners) occurred at the widest angle position will not disappear yet even if it's zoomed.
SONY HDR-FX1000, FX1000E, AX2000, AX2000E, HVR-Z5E, HVR-Z5U, HXR-NX5U, NX5E HD Camcorders
These are the comparison movies taken by a 13x zoom High Definition camera with or without the HDP-5072EX lens attached,
at the same distance.
(16:9 mode)
These are the comparison movies taken by a 12x zoom High Definition camera with or without the HDP-5072EX lens attached,
at the same distance.
(16:9 mode)
These are the comparison movies taken by a 20x zoom High Definition camera with or without the HDP-5072EX lens attached,
at the same distance.
(16:9 mode)
The standard accessories come with the HDP-5072EX lens
● The specifications and cosmetic designs may change without a prior notice.
● HDP-5072EX Semi-fisheye lens weighs 640g and it's rather bulky, and please support the lens by hand carefully in shooting, and dismount the lens after completing the shooting.
● The HDP-5072EX Semi-fisheye lens is designed with a priority purpose of widening the field of view in maintaining the superb high image quality when used at the wide angle range of a camera's zoom lens.
● There will be no influence on the original F number of the camera when HDP-5072EX Semi-fisheye lens is on. It remains the original F number of the camera lens.
● The focusing zoom range with the HDP-5072EX Semi-fisheye lens on will vary depending on the model of High Definition camera in use, and generally speaking the focusing zoom range is from the end of wide angle point up to mid zoom area. No focusing at the telephoto zoom range.
● With the HDP-5072EX lens on, usually do focus the camera under Auto Focus mode. In using the replaced interchangeable lens or in operating under the Special Scene mode, there may be possibility of not focusing precisely even with its manual focus mode.
● Although you may detect a white dot in the HDP-5072EX lens sometimes when looking into from the front, but it's not out of normal and would not affect any of image quality. ● Exposing the conversion lens to a warm atmosphere in an instant way from the cold area may create some dews on and inside the lens. When it happened inside the lens, keep the lens in a dry area till the dews disappear before using. Repeating such situation may leave dirt spot-(mildew) and affect the image. ● All of Raynox conversion lenses are proudly made in Japan. At our wholly owned manufacturing subsidiary, every stage of production is rigorously checked and tested so that the lens elements compensate effectively for astigmatism, distortion and spherical aberration.... for an excellent image quality. ● The lens is neither made for dust-free nor moisture/water-proof.
●When mounting the HDP-5072EX Semi-fisheye lens onto the High Definition camera, we recommend set the camera vertically and do it very carefully, like shown in Pic.1.
DCR-5320PRO 3-in-1 High Definition Triple Macro Conversion Lens
The DCR-5320PRO High Definition Macro Conversion lens is particularly designed to use with the high-end digital, film and hi-vision cameras, resulting in an amazing resolution power of 200L/mm at center (MTF 30%) with a low dispersion. With the Macro lens attached on the camera's lens, it makes possible to approach the object very close for macro shooting. The model consists of two independent lenses, one is with 2-diopter magnification and the other with 3-diopter. It also makes a 5-diopter lens by coupling the both lenses together. Taking advantage of using in three ways, you can shoot the object at the distances of either 50cm or 30cm or 17cm, depending upon the nature of a subject. All lens glass elements are fully coated for the optimum light transmittance and fine image quality.
The adapter rings which fit to the 52mm, 55ｍｍ, 58mm, 62mm, 67mm, 77mm, 82mm threads (except 72mm) are sold separately.
* MTF30%-theoretical number obtained.
The DCR-5320PRO Macro Close-up lens is made of two independent lenses of 2-diopter magnification and 3-diopter one, both fabricated in doublet formula for less color aberration at corners. By putting the two lenses together, it creates the high 5-diopter magnification macro close-up conversion lens with the excellent high resolution power of 200 lines/mm at center (MTF30%) at center.
(*the distance shown is measured from top of the lens to the surface of object when the lens is set at infinity).
How ?
Add one more DCR-5320PRO onto the same set, giving you
8 different diopter choice of 2, 3, 4, 5, 6, 7, 8 and 10.
The DCR-5320PRO Macro Close-up lenses are compatible with the latest High Definition cameras introduced in the market lately. The shooting distance will be either at 50cm (2-diopter lens), 30cm (3-diopter lens) and 17cm (5-diopter lens) with an infinity setting of the camera lens.
● It is recommended to use the 2-diopter and 3-diopter lenses with the camera lens set at longer than 50mm FL (35mm film equiv.), and 100mm FL with the 5-diopter lens.. There may be a possibility of vignetting (darkened corners) happens when the FL (focal length) used is set at shorter than the above mentioned.
● The all figures and numbers of the lenses mentioned in this explanation were the ones obtained when the focusing distance of taking lens was set at infinity. Usually, when the focusing distance is set at nearer than the infinity, the focusing could be done at the nearer point than the described in this explanation.
● While the Macro lens is attached on, do not use the built-in flash. If you do, there would be a shadow of the lens barrel shown in the picture taken.
● There might be a possibility of not functioning of a remote control when the Macro lens is attached. Please try a rehearsal shot first before using it.
● Please detach the Macro lens and holder before carrying the camera around after completing the shooting.
● The slight vignetting (darkened corners) could be shown on the taken picture, though it did not appear on the LCD monitor or viewfinder.
● Knowing the rather heavy weight (395g) of the Macro lens, be careful in holding the lens and camera firm for shooting.
● When using with an interchangeable lens of 35mm digital SLR camera, make focusing manually, except with the one made of an Inner Focusing system. ● Screw-thread pitch size is 0.75mm unless specified.
● The cosmetic design and optical specifications are subject to change without a prior notice.
The lens includes a snap-on universal mount suitable for 52mm to 67mm filter size.
DCR-150 Macro lens obtains the maximum macro magnification power when set at the most telephoto position of zoom lens. The lens is made of high index optical glass elements which produce rich and razor sharp image.
49mm Front filter size
2G/3E Hi-Index Optical Glass
Snap-on Universal Adapter
Compatible with HD-Camcorder
DCR-150 is also suitable to High Definition Camcorders.
Macro Comparison shots taken with 3-CCD Camcorder.
A LIST OF ADAPTERS for your Camcorder filter thread sizes
(480KB)
(3400KB)
(600KB)
(3600KB)
● The specifications and cosmetic designs may change without prior notice.
DCR-150 may cause vignetting image( darkening one or more corner of the taken image )when used with wideangle lens.
All of Raynox conversion lenses are proudly made in Japan. At our wholly owned manufacturing subsidiary, every stage of production is rigorously checked and tested so that the lens elements compensate effectively for astigmatism, distortion and spherical aberration.... for an excellent image quality. ● Screw-thread pitch size is 0.75mm unless specified. ●Exposing the conversion lens to a warm atmosphere in an instant way from the cold area may create some dews on and inside the lens. When it happened inside the lens, keep the lens in a dry area till the dews disappear before using. Repeating such situation may leave dirt spot-(mildew) and affect the image. ●All of Raynox conversion lenses are proudly made in Japan. At our wholly owned manufacturing subsidiary, every stage of production is rigorously checked and tested so that the lens elements compensate effectively for astigmatism, distortion and spherical aberration.... for an excellent image quality. ●The lens is neither made for dust-free nor moisture/water-proof.
RAYNOX® is the registered trademark of Yoshida Industry Co., Ltd. Tokyo. Other brand names and the models are the trademarks of their manufactures or their subsidiaries and may be registered in certain jurisdictions.
The lens includes a snap-on universal mount suitable for 52mm to 67mm filter size.
DCR-250 Super Macro lens obtains the maximum macro magnification power when set at the most telephoto position of zoom lens. The lens is made of high index optical glass elements which produce rich and razor sharp image.
49mm Front filter size
2G/3E Hi-Index Optical Glass
Snap-on Universal Adapter
Compatible with HD-Camcorder
DCR-250 is also suitable to High Definition Camcorders.
Macro Comparison shots taken with 3-CCD Camcorder.
A LIST OF ADAPTERS for your Camcorder filter thread sizes
● The specifications and cosmetic designs may change without prior notice.
DCR-250 may cause vignetting image( darkening one or more corner of the taken image )when used with wideangle lens.
All of Raynox conversion lenses are proudly made in Japan. At our wholly owned manufacturing subsidiary, every stage of production is rigorously checked and tested so that the lens elements compensate effectively for astigmatism, distortion and spherical aberration.... for an excellent image quality. ● Screw-thread pitch size is 0.75mm unless specified. ●Exposing the conversion lens to a warm atmosphere in an instant way from the cold area may create some dews on and inside the lens. When it happened inside the lens, keep the lens in a dry area till the dews disappear before using. Repeating such situation may leave dirt spot-(mildew) and affect the image. ●All of Raynox conversion lenses are proudly made in Japan. At our wholly owned manufacturing subsidiary, every stage of production is rigorously checked and tested so that the lens elements compensate effectively for astigmatism, distortion and spherical aberration.... for an excellent image quality. ●The lens is neither made for dust-free nor moisture/water-proof.
RAYNOX® is the registered trademark of Yoshida Industry Co., Ltd. Tokyo. Other brand names and the models are the trademarks of their manufactures or their subsidiaries and may be registered in certain jurisdictions.
The combination of MSN-202 and SONY HDR-FX7/HVR-V1 display panel makes it easy to capture a tiny object from the distance of 32mm to the object at maximum telephoto position.
Magnification: 25-Diopter
Lens construction: 3G/4E Optical coated glass elements
Image size: 1.9mm width
Effective zooming without vignetting: 12x - 20x zoom
Front filter size: None
Mounting threads: 37mm
Size/Weight: 22 x 42mm/60g(2.1oz)
MSN-505 Super Macro Conversion Lens
With MSN-505 Super Macro lens attached, the camera captures an intricate tiny object like 2mm width for a frame-filling enlarged close-up image from the distance of 18.5mm to the object at the maximum telephoto position.
Magnification: 32-Diopter
Lens construction: 3G/4E Optical coated glass elements
Image size : 1.4mm width
Effective zooming without vignetting: 18x - 20x zoom
Front filter size: None
Mounting threads: 37mm
Size/Weight: 26 x 42mm/86g(3oz)
The DCR-2025PRO/DCR-2020PRO lens is originally designed to produce optimum image quality when used with a camera/camcorder incorporated with 8-time or higher zoom lens.However, depending upon the matching with the type of camera lens it may produces a superb image quality with a zoom lens less than 8-time ratio such as 4 times or 6 times.
Compatible with HD-Camcorder
DCR-2025PRO/DCR-2020PRO are also suitable to the High Definition Digital Camcorders and DVCAM such as SONY HDR-FX7, VX-2100, VX-2000, VX-1000, PD-170, PD-150, PD-100, TRV-900,/950 Canon GL-1, GL-2, XM-1/2. etc.
A LIST OF ADAPTERS for your Camcorder filter thread sizes
● RA6243 F62-M43mm Adapter ring
for 43mm filter size.
(DCR-2025PRO-Included accessory)
● RA6252 F62-M52mm Adapter ring
for 52mm filter size.
(DCR-2025PRO/DCR-2020PRO-Included accessory)
● RA6255 F62-M55mm Adapter ring
for 55mm filter size.
(DCR-2025PRO-Included accessory)
● RA6258 F62-M58mm Adapter ring
for 58mm filter size.
(DCR-2025PRO/DCR-2020PRO-Included accessory)
NEW RA6272 F62-M72mm Adapter ring is also available.(Sold separately)
●** DCR-2025PRO/DCR-2020PRO may cause vignetting image( darkening one or more corner of the taken image )when used with this model.
●DCR-2025PRO/DCR-2020PRO was designed to use at most Telephoto position of camera's zoom lens.
●Zooming towards wide angle side while the lens is attached may result in some degree of darkening at the corners of the frame(vignetting). Use at the maximum telephoto position of the zoom lens.
●The remote control function may not work properly when the DCR-2025PRO/DCR-2020PRO is attached. Use the LCD monitor screen for getting a precise picture framing, not through the optical view finder.
●Be careful in handling the camera with the lens attached, such as supporting or protecting the lens by your own hand.
●The specifications and cosmetic designs may change without prior notice. ● Screw-thread pitch size is 0.75mm unless specified.
●Do not use the built-in flash while the DCR-2025PRO/DCR-2020PRO is attached. ●Exposing the conversion lens to a warm atmosphere in an instant way from the cold area may create some dews on and inside the lens. When it happened inside the lens, keep the lens in a dry area till the dews disappear before using. Repeating such situation may leave dirt spot-(mildew) and affect the image. ●All of Raynox conversion lenses are proudly made in Japan. At our wholly owned manufacturing subsidiary, every stage of production is rigorously checked and tested so that the lens elements compensate effectively for astigmatism, distortion and spherical aberration.... for an excellent image quality. ●The lens is neither made for dust-free nor moisture/water-proof.
RAYNOX® is the registered trademark of Yoshida Industry Co., Ltd. Tokyo. Other brand names and the models are the trademarks of their manufactures or their subsidiaries and may be registered in certain jurisdictions.
HDP-9000EX High Definition Telephoto conversion Lens 1.8x
Especially developed for using with a large aperture taking lens of High Definition camera, extending the focal length 1.8 times. Brings a distant subject up very close in maintaining the original superb image quality.
HDP-9000EX lens is originally designed in high resolution formula getting an amazing It perfectly suits to a high definition camera.
The lens comes with an originally made Lens Shade which shuts a flare and ghost image effect considerably and the lens case. These are packed with the lens in the carton together.
With the HDP-9000EX lens attached, there will be no influence on F number of the master lens.
The lens has a mounting thread of 72mm, and with an adapter ring of 62mm, 77mm or 82mm, which are sold separately, the lens can be attached on the suitable camera lens.
Specifications & Measurements
Construction
Sturdy and solid metal body(except the Lens Shade)
Magnification
Nominal 1.8x Actual 1.8x Diagonal, 1.8x Horizontal
SONY HDR-FX1000, FX1000E, AX2000, AX2000E, HVR-Z5E, HVR-Z5U, HXR-NX5U, NX5E HD Camcorders
These are the comparison movies taken by a 20x zoom High Definition camera with or without the HDP-9000EX lens attached,
at the same distance.
(16:9 mode)
These are the comparison movies taken by a 12x zoom High Definition camera with or without the HDP-9000EX lens attached,
at the same distance.
(16:9 mode)
These are the comparison movies taken by a 20x zoom High Definition camera with or without the HDP-9000EX lens attached,
at the same distance.
(16:9 mode)
With HDP-9000EX lens on, there will be a darkening at corners (vignetting) when the camera is zoomed towards wide angle side, though the starting point of darkening may vary depending on the camera in use. For example, with Sony HDR-FX1/HVR-Z1 it does not occur between 6x and 12x zoom area, With SONY HDR-FX7/HVR-V1 it does not occur between 5x and 20x zoom area, With SONY HVR-Z7/Z7E 12x zoom lens it does not occur between 8x and 12x zoom area, With Canon XL 1/XL 2, XL H1 20x zoom it will be between 6x and 20x zoom area, And with XH G1/XH A1 it will be between 13x and 20x zoom area. The 'vignetting' means the darkened corners on the picture, and it may happen with only at one corner or two or all four, depending upon the characteristics of the camera in use.
The standard accessories come with the HDP-9000EX lens
Lens hood / Sun shade
Lens case
Lens caps
● RA7282 F72-M82mm Adapter ring
for 82mm filter size.(Sold separately)
● RA7277 F72-M77mm Adapter ring
for 77mm filter size.(Sold separately)
● RA7267 F72-M67mm Adapter ring
for 67mm filter size.(Sold separately)
● RA7262 F72-M62mm Adapter ring
for 62mm filter size.(Sold separately)
● RA7258 F72-M58mm Adapter ring
for 58mm filter size.(Sold separately)
● RA7255 F72-M55mm Adapter ring
for 55mm filter size.(Sold separately)
● RA7252 F72-M52mm Adapter ring
for 52mm filter size.(Sold separately)
● The specifications and cosmetic designs may change without a prior notice.
● HDP-9000EX lens weighs 825g and it's rather bulky, and please support the lens by hand carefully in shooting, and dismount the lens after completing the shooting.
With HDP-9000EX lens on, there will be a darkening at corners (vignetting) when the camera is zoomed towards wide angle side, though the starting point of darkening may vary depending on the camera in use. For example, with Sony HDR-FX1/HVR-Z1 it does not occur between 6x and 12x zoom area, With SONY HDR-FX7/HVR-V1 it does not occur between 5x and 20x zoom area, With SONY HVR-Z7/Z7E 12x zoom lens it does not occur between 8x and 12x zoom area, With Canon XL 1/XL 2, XL H1 20x zoom it will be between 6x and 20x zoom area, And with XH G1/XH A1 it will be between 13x and 20x zoom area. The 'vignetting' means the darkened corners on the picture, and it may happen with only at one corner or two or all four, depending upon the characteristics of the camera in use.
● Please note that the minimum shooting distance of the camera may extend three times when HDP-9000EX lens is attached on.
● There will be no influence on the original F number of the camera when HDP9000EX lens is on. It remains the original F number of the camera lens. ● Screw-thread pitch size is 0.75mm unless specified. ●Exposing the conversion lens to a warm atmosphere in an instant way from the cold area may create some dews on and inside the lens. When it happened inside the lens, keep the lens in a dry area till the dews disappear before using. Repeating such situation may leave dirt spot-(mildew) and affect the image. ●All of Raynox conversion lenses are proudly made in Japan. At our wholly owned manufacturing subsidiary, every stage of production is rigorously checked and tested so that the lens elements compensate effectively for astigmatism, distortion and spherical aberration.... for an excellent image quality. ●The lens is neither made for dust-free nor moisture/water-proof.
DCR-1542PRO HIGH DEFINITION TELEPHOTO CONVERSION LENS
High-Resolution 340-line/mm
2G/4E High Definition design
Minimum Chromatic Aberration
67mm Front filter size
Bringing a distant object really very close The model DCR-1545PRO/DCR-1542PRO high definition telephoto lens is made of the high index optical glass elements with new concept of lens designing using two-group/four-element lens formulae. This new concept in designing the lens made it possible to achieve an amazing high definition telephoto lens of the 340 lines/mm resolution power at center (MTF30%), low dispersion and the increased light transmittance at fringe area. This is an ideal Telephoto conversion lens for the High Definition camera with 25x or more optical zoom lens. By using a suitable adapter and/or holder, the DCR-1542PRO lens can be used with the appropriate digital still camera or HD video camcorder, effectively. DCR-1542PRO comes with 3-adapter rings for 37mm, 43mm and 55mm filter sizes. There is no difference in the quality of lens between DCR-1545PRO, DCR-1542PRO, DCR-1541PRO and DCR-1540PRO. High-Resolution 340-line/mm 2G/4E High Definition design Minimum Chromatic Aberration 67mm Front filter size An actual image taken with DCR-1540PRO Click the lens to comparison images Specifications & Measurements Magnification Nominal 1.54x Actual 1.54x/Diagonal, 1.54x/Horizontal Lens construction 2-group/4-element, Coated optical glass elements Front Filter size 67mm Mounting thread 52mm Dimensions 67mm x 71mm Weight 240g(8.5oz) Accessories for DCR-1542PRO 3-Adapter rings for 37mm, 43mm and 46mm filter sizes, Lens pouch, Lens caps, Instruction manuals Accessories for DCR-1545PRO 2-Adapter rings for 49mm and 55mm filter sizes, Lens pouch, Lens caps, Instruction manuals DCR-1542PRO included adapter rings Compatible with 4K/HD-Camcorder DCR-1545PRO/DCR-1542PRO is also suitable to the 4K/HDV Camcorders, 3-CCD chip or mega-pixel Digital Camcorders and DVCAM.
There is no difference in the quality of lens between DCR-1545PRO, DCR-1542PRO, DCR-1541PRO and DCR-1540PRO.
Specifications & Measurements
Magnification
Nominal 1.54x
Actual 1.54x/Diagonal, 1.54x/Horizontal
DCR-1545PRO HIGH DEFINITION TELEPHOTO CONVERSION LENS
High-Resolution 340-line/mm
2G/4E High Definition design
Minimum Chromatic Aberration
67mm Front filter size
The model DCR-1545PRO/DCR-1542PRO high definition telephoto lens is made of the high index optical glass elements with new concept of lens designing using two-group/four-element lens formulae. This new concept in designing the lens made it possible to achieve an amazing high definition telephoto lens of the 340 lines/mm resolution power at center (MTF30%), low dispersion and the increased light transmittance at fringe area. This is an ideal Telephoto conversion lens for the High Definition camera with 25x or more optical zoom lens. By using a suitable adapter and/or holder, the DCR-1545PRO/DCR-1542PRO lens can be used with the appropriate digital still camera or HD video camcorder, effectively. DCR-1545PRO comes with 2-adapter rings for 49mm and 55mm filter sizes.
Specifications & Measurements
Magnification
Nominal 1.54x
Actual 1.54x/Diagonal, 1.54x/Horizontal
The model HD-7062PRO, HD-7000PRO high definition Wideangle conversion lens are made of the high index optical glass elements with new concept of lens designing using three-group/three-element lens formula. This new concept in designing the lens made it possible to achieve an amazing high definition wideangle lens of 540 lines/mm resolution power at center (MTF30%).
It's compatible with whole zoom area and stays in focus*.
There will be no reduction of light value when this conversion lens is attached on the camera's lens.
There are no quality difference between HD-7062PRO and HD-7000PRO except its mounting thread size.
HD-7062PRO is 62mm mounting threads. HD-7000PRO is 58mm mounting threads.
Compatible with whole zoom area
82mm front filter size
High-Resolution 540-line/mm
3-Group/3-Element High Definition design
Specifications & Measurements
Magnification
Nominal 0.70x, Actual 0.70x Diagonal, 0.71x Horizontal
Lens construction
3-group/3-element, Coated optical glass elements
Image distortion
-2.3%(max.wideangle)
Front Filter thread
82mm
Mounting thread
62mm/HD-7062PRO, 58mm/HD-7000PRO
Dimensions
43mm x 86mm/HD-7062PRO, 40mm x 86mm/HD-7000PRO
Weight
313g(11.1oz)
Accessories
Pouch, Lens caps, Instruction manuals
Adapter rings for use with HD-7000PRO(Sold separately)
RA5837 for 37mm Filter size
RA5843 for 43mm Filter size.
RA5852 for 52mm Filter size.
Wideangle to Telephoto Video Clip taken with HD-7000PRO on Digital Video Camcorder
(600KB)
(256KB)
●The cosmetic designs may change without prior notice. ●Depending upon the model of camera in use or the condition of shooting, especially when the lighting is not bright enough, there may be possibility of creating a flare effect which reduces the image quality at the telephoto. When the HD-7062PRO, HD-7000PRO lens are attached and set at telephoto for a distant object, please make sure that the object is under the bright condition. ●The HD-6600PRO wideangle lens is designed with a priority purpose of widening the field of view in maintaining the superb high image quality when used at the wide angle range of a camera's zoom lens. ●The lens is made compatible in using with a 20x zoom lens. However, when zoomed up to the end of the telephoto with the lens on, the image quality of the picture will be lowered except the center area, and the deterioration of resolution power at corners will occur. ●Remote control function and internal video light/Flash may not work properly with conversion lens attached. ●For use with Panasonic AG-DVC30 camera; use Raynox PFR-043MC filter between the RA5843 and the camera lens threads. ●Exposing the conversion lens to a warm atmosphere in an instant way from the cold area may create some dews on and inside the lens. When it happened inside the lens, keep the lens in a dry area till the dews disappear before using. Repeating such situation may leave dirt spot-(mildew) and affect the image. ●All of Raynox conversion lenses are proudly made in Japan. At our wholly owned manufacturing subsidiary, every stage of production is rigorously checked and tested so that the lens elements compensate effectively for astigmatism, distortion and spherical aberration.... for an excellent image quality. ●The lens is neither made for dust-free nor moisture/water-proof.
HDP-7880ES 4K compatible High Quality Wide-angle Conversion Lens 0.79x
RAYNOX HDP-7880ES Wide Angle conversion lens broadens field of view larger in all directions, and your picture will include 27% more of the scene. The model HDP-7880ES high definition wide-angle lens is made of high index eco-optical glass elements with new concept of lens designing using three-group/three-element lens formulae. This new concept in designing the lens made it possible to achieve an amazing high definition wide-angle lens of the 355 lines/mm resolution power at center (MTF30%). It achieved level of almost non-distortion, -1.9% rate. It creates an unusually fine and non-distorted wide angle image.
This particular lens is designed for use with the 4K Wide Angle coverage Video Camcorders.
In using the appropriate adapter rings (included accessory), the HDP-7880ES lens will be compatible with 55mm, 58mm and 62mm filter sizes.
For the front filter thread of other than 55mm, 58mm, 62mm, please use a suitable Raynox adapter ring or tube sold separately. For suitable size of threads, please see the Cross Reference Table in our catalog or Raynox Website (http://www.raynox.com).
.gif){kind=small}
.gif){kind=small}
.gif)
.jpg)
.gif)
.gif){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg)
.gif){kind=small}
.gif)
.gif){kind=small}
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.gif){kind=small}
.gif){kind=small}
.gif){kind=small}
